Two-component (5:1) water-based epoxy. Certified for direct contact with food, potable water, alcohol (≤15%). Used for food storing facilities, refrigerating rooms.

Fields of application

  • Floors and walls of factories, shops, laboratories, stairs, slaughter-houses, garages, water-tanks and on asphalt
  • Indoor areas, where solvent fumes are undesirable (e.g. wine & food stores, factories, bathrooms
  • Metallic surfaces and damp (fresh) concrete surfaces

Properties & advantages

Environmentally friendly

  • Easy to apply/ quick-drying
  • Resistant to water, alkalis, detergents, diluted acids and many solvents
  • Significant adhesion on cement surfaces
  • Good abrasion, yellowing & strength resistance
  • Doesn’t contain any solvents (0% V.O.C. content) nor benzyl alcohol
  • Certified for permanent contact with a) foodstuff b) drinking water c) beverages with alcohol content ≤15% in tanks >10m3

Technical Characteristics

  • Appearance: Satin
  • Mixing ratios (weight prop.): 100A:20B
  • Consumption: 330-400gr/m2 for two layers
  • Drying time (25°C): 1-2 hours
  • Dry to recoat: after 6-24 hours
  • Walkability: 24 hours
  • Total hardening: 5-7 days
  • Minimum temperature of application: >12°C
  • Taber abrasion (CS 10/1000/1000): 91mg

Standard colours

*Tailor-made shades can be produced for a certain quantity, upon special arrangement


Sets of 1,2kg, 6kg and 12kg tin cans (components A&B have fixed weight proportion


Aqua Primer:
Two component water-based epoxy primer (2,5:1) for floors that needs hardening and higher adhesion prior to applying Neopox W. It prevents the creation of dust. Consumption: 160-330gr/m2 (for 2 layers)