PACKAGES
Sets of 3kg and 1kg (components A&B have fixed weight proportion)

Description

Two-component, water based, polyurethane transparent varnish, cured with aliphatic polyisocyanates

Fields of Application

Recommended as a protective varnish after colored decorative cement slurries, stone, wooden surfaces and cement based floors. It is friendly to the environment and the end-user and is suitable for places where solvent smells are undesirable.

Properties & advantages

  • High strength
  • Strong adhesion
  • Excellent hardness
  • Long lasting durability against weathering
  • Abrasion resistance
  • Very good yellowing resistance
  • Resistant against UV radiation

Technical Characteristics

  • Polyurethane varnish (mat)
  • Color: transparent
  • Density: 1,01 g/cm3
  • Mixing ratios (weight prop.): 90A:10B (mat)
  • Hardening time (tack free) (25°C): 2 hours
  • Working time (25°C): 1 hour
  • Minimum temperature of application: 12°C – 35°C
  • Walkability (25°C): 1 day
  • Total hardening (25°C): ~7 days
  • Dry to recoat (25°C): after 24 hours
  • Abrasion Resistance: 30 mg – Taber Test ASTM D 4060 (CS 10/1000/1000)
  • Adhesion Strength (EN 13892-8): ≥2, 5 Ν/mm2
  • Resistance to temperature change: -30°C up to +80°C
  • (Dry loading)
  • Consumption: 125gr/m2 on properly prepared surfaces
  • Dry film thickness: 64 μm (in one layer)
  • (low temperatures and high humidity during application prolong drying time)